Installing The Cutting Tool And Loading The Cutting Material - Roland iModela iM-01 Master Manual

Installing the Cutting Tool and Loading the Cutting Material

CAUTION
1.
Install the cutting tool.


Open the front, rear, and side covers. Slowly push the main unit down onto its back.

Fully insert the cutter into the collet.
Be careful not to injure yourself when you handle the blade of the cutting
tool.
Before Starting Cutting
Click [View] on the iModela
Controller.
The spindle head moves to the cen-
ter, and the table moves to the front.
This is the view position.
Hook
Pull the hooks towowrds
you with the part of the
handle.
Collet
Cutting tool
(accessory)
Chapter 2 Cutting
15