Introduction; Part Names - Roland FJ-500 User Manual

* In this manual, sections that explain commons points for the FJ-500/400 use only illustrations of the FJ-500. Some details of the FJ-
400 differ from the figure.

1-1 Part Names

NOTICE
If you will leave the printing head being uncapped for a long time (for example, open the front cover while
printing is made on the middle of platen), printing heads may get clogging and, in some case it results unrecov-
erable damage to the printing head.
Do not touch the Y rail or the inner side of the right cover.
Touching the area shown may cause the fingers to be soiled by grease or ink, and may result in diminished
image quality.

1 Introduction

Entire Y-rail portion
Do not put hands inside
1 Introduction
9