Description Of Keys And Display Menus; Description Of Keys - Roland FJ-500 User Manual

4 User's Reference

4-5 Description of Keys and Display Menus

Description of Keys

Top
Key
menu
—
—
—
—
PRINT
QUALITY
70
Submenu
— This switches on and off the sub power . When the
power is switched on, the POWER LED lights up.
— This detects the presence and the width of the material,
and displays the printable width.
The SETUP LED flashes while detection of material
width is in progress. When setup finishes, the SETUP
LED lights up continuously.
Also press this key when removing the material.
Pressing this key when any of the various menu screens
is displayed returns you to the top screen. (When this is
done, material setup cannot be canceled.)
— The [PAUSE] key pauses printing. The PAUSE LED
lights up while paused.
Pressing this key again cancels the paused state.
Holding down the [SETUP] key for about 1 second
while paused causes remaining data to be cleared and
cancels the material's setup state.
— This sets the print-start location in the horizontal
direction (the direction of carriage movement). For
more information, see "2-5 Printing -- Printing at the
Desired Location -- Specifying a location in the left-
right direction (the direction of carriage movement)."
— This displays the [PRINT QUALITY] menu for setting
image quality.
This is used to specify the printing quality and unidi-
rectional or bidirectional printing.
Settings cannot be made while printing is in progress.
To exit the [PRINT QUALITY] menu screen, press the
[MENU] key, the [CLEANING] key, or the [SETUP]
key.
When you can make the settings for the printing mode
and printing direction on the computer, the computer's
settings take priority.
For more information, see "2-5 Printing -- Setting the
Printing Mode."
Function
Setting Default
range value
— —
— —
— —
— —
[Printing [Printing
quality] quality]
vPHOTO NORMAL
vSUPER
vNORMAL
SUPER
NORMAL
DRAFT
[Printing [Printing
direction] direction]
UNI-DIRECTION BI-
BI-DIRECTION DIRECTION