Making Call Type Settings; Making Sip Settings - Panasonic KX-VC300 User Manual

5.
Use [ ][ ] to select "Yes" and press [Enter].
•
The system will automatically restart to reflect
changes to system settings.
Note
•
When changing the connection mode, the time
required for a restart may depend on network
conditions.

Making Call Type Settings

Note
•
These settings can only be made in IP mode
(Page 108).
1.
Login to the administrator menu (Page 105).
•
The admin menu screen is displayed.
2.
Press [ ].
•
The second page is displayed.
3.
Use [ ][ ] to select "Call Type Settings" and
press [Enter].
•
The call type settings screen is displayed.
4.
Use [ ][ ] to select the following items for input:
"SIP": Use [ ][
"OFF".
Note
•
When "OFF" is selected, you cannot use a
SIP server even if "ON" is set to "SIP
Server" (Page 110).
•
If the other party is using a software version
older than 3.00 (not including 3.00), you
cannot make a video conference call using
H.323. You must select "ON".
] to select "ON" (default) or
"H.323": Use [ ][
"OFF".
Note
•
When "OFF" is selected, you cannot use a
gatekeeper and H.460 even if "ON" is
selected for "Gatekeeper" and "H.
460" (Page 111).
"Default Call Type": Use [
"SIP" (default) or "H.323".
Note
•
The call type that you select here will be
reflected in the information displayed on the
Home screen and in the default value of the
call type when making a video conference
call.

Making SIP Settings

When using a SIP server over an intranet, video
conference calls can be made using SIP URIs (SIP user
name@SIP domain name).
Note
•
These settings can only be made in IP mode
(Page 108) and when "SIP" is set to "ON" on
the call type settings screen.
•
Video conference calls to an MCU or a
non-Panasonic video conference system
through a SIP server using a SIP URI are not
guaranteed.
•
When connecting to an MCU by entering the
MCU's conference room number@IP address,
"SIP Server" and "Gatekeeper" (Page 111)
must be set to "OFF".
•
If video conference calls cannot be made
because there is a problem with the SIP server,
the SIP settings are incorrect (on the server, or
on the unit), etc., "Not registered" will be
displayed on the Home screen instead of the
SIP user name. In this case, you cannot make
calls using either IP addresses or SIP. Contact
your network administrator.
1.
Login to the administrator menu (Page 105).
•
The admin menu screen is displayed.
2.
Press [ ].
•
The second page is displayed.
Contacts and Settings
] to select "ON" (default) or
][ ] to select
User Manual 109