3.
Use [
][
] to select "Software update" and
press [Enter].
•
The software update screen is displayed.
4.
Use [
][
] to select "Update Method" and press
[Enter].
5.
Use [
][
] to select "Network" or "USB" and
press [Enter].
–
"Network": Updates the software from the
network.
–
"USB": Updates the software from a USB
memory device.
Note
•
If you want to select "USB", contact your
dealer for the details.
6.
When "Automatic Version Check" is set to
"ON" (Page 108):
The latest software version is displayed next to
"Available Software version :". Proceed to step
7 if there is an update available.
When "Automatic Version Check" is set to
"OFF" (Page 108) or when "Update Method" is
set to "USB" in step 5:
Use [
][
] to select "Software updates" and
press [Enter].
•
The system checks for version updates. The
latest software version will be displayed next to
"Available Software version :". Proceed to
step 7 if there is an update available.
7.
Use [
][
] to select "Update Software Now"
and press [Enter].
•
A dialogue box to confirm the updating of your
software is displayed.
Note
•
Please carefully read and confirm the
cautions in the dialogue box before
proceeding to the next step.
8.
Use [
][
] to select "Yes" and press [Enter].
•
The update is automatically downloaded and
installed.
•
To complete the update, the system will
automatically restart twice. Before each restart,
a message will be displayed as detailed below.
The message displayed before the first restart
The message displayed before the second restart
After the second restart, the system will start up with
the latest software.
Note
•
Contact your dealer for more information on
obtaining the latest firmware and User Manual.
•
If the checking, downloading, or installing of a
software update fails, an error message is
displayed. Press [Enter] to restart the system.
Please try the following:
Contacts and Settings
User Manual
117