Changing the Screen Layout during a 3-party Video
Conference Call
You can choose from 7 different screen layouts when taking part in a 3-party (This Site, Site 1, Site 2) video
conference call.
Note
•
You cannot perform this operation when using H.323 or connecting to an MCU or non-Panasonic video
conference system.
1
Press [Layout].
•
The screen will cycle through the available layouts
each time you press [Layout].
–
Layout 1: Image of Site 1 on the left and image
of Site 2 on the right.
–
Layout 2: The images are displayed as follows:
Site 1: upper left
Site 2: upper right
This Site: bottom middle
–
Layout 3: Image of Site 1 is displayed full screen
and image of Site 2 is displayed in the upper right
subscreen.
–
Layout 4: Image of Site 2 is displayed full screen
and image of Site 1 is displayed in the upper left
subscreen.
–
Layout 5: The image of Site 1 is displayed full
screen.
–
Layout 6: The image of Site 2 is displayed full
screen.
–
Layout 7: Your own image is displayed full
screen.
Changing the Screen Layout
1
User Manual
51