Panasonic KX-VC300 User Manual page 43

1 Press [Menu].
•
The Menu screen is displayed.
2
Select "Call History" using [
•
The outgoing call history screen is displayed.
Note
•
The result of the video conference call is
displayed in the "Call result" column as follows:
–
: The video conference call was
established.
–
: The video conference call was not
established.
•
To move to the incoming call history screen,
press [G]. You can switch between the outgoing
call history screen and the incoming call history
screen by pressing [G].
•
In the incoming call history, if a party is not
registered in your contact list, their IP address (or
host name)/SIP URI (or SIP user name)/H.323
extension/H.323 name will be displayed.
•
In the outgoing call history, if a party is registered
in your contact list, the contact name is
displayed. However, when calling by entering an
IP address, SIP URI (or SIP user name), H.323
extension, H.323 name, or MCU's conference
room number@IP address (Page 40), even if the
party is registered in your contact list, the entered
information is displayed instead of the contact
name.
][ ] and press [Enter].
Starting a Video Conference
1
4
2, 3
5
User Manual 43