Panasonic KX-VC300 User Manual page 147

Message
Check the Main Camera
connection.
Unable to register, the contact
list is full.
Invalid IP Address.
Invalid Subnet mask.
Invalid Default Gateway.
Invalid Date/Time.
PC is not connected.
Check the connection.
Sub-Camera is not
connected.
Check the connection.
•
A cable or cord is not properly connected.
→
Check that all cables to the unit are connected properly (Page 19).
•
The signal input from the main video camera is invalid.
→
A valid signal cannot be received from the connected main video
camera. Contact your dealer.
•
The contact list has reached its maximum capacity.
→
Delete unneeded contacts (Page 88).
•
The format of the IP address that you entered is invalid.
→
Enter the IP address correctly, in the format XXX.XXX.XXX.XXX
(decimal values separated by periods). For values of only 1 or 2 digits,
enter these numbers as they are. Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
Multicast or broadcast addresses cannot be used.
•
The input subnet mask is invalid.
→
Enter a valid subnet mask. For values of only 1 or 2 digits, enter these
numbers as they are. Do not enter like [.000].
Example: The subnet mask is [255.255.255.0].
–
Correct entry: [255.255.255.0]
–
Wrong entry: [255.255.255.000]
•
The input default gateway is invalid.
→
Enter a valid default gateway. For values of only 1 or 2 digits, enter
these numbers as they are. Do not enter like [.001].
Example: The default gateway is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
•
Enter a date within the valid parameters.
→
Enter a date between January 1, 2012, and December 31, 2035.
•
A cable or cord is not properly connected.
→
Check that all cables to the unit are connected properly (Page 72).
•
The computer is not turned on.
→
Turn on the computer.
•
The computer is not set to output from its external monitor video out
port.
→
Change the computer's settings so that video is output from the external
monitor port.
•
A cable or cord is not properly connected.
→
Check that all cables to the unit are connected properly (Page 78).
•
The sub video camera is not turned on.
→
Turn on the sub video camera.
Cause and Solution
Additional Information
User Manual 147