Part Names And Usage; Main Unit (Front) - Panasonic KX-VC300 User Manual

Hd visual communication unit
Hide thumbs Also See for KX-VC300:
Table of Contents

Advertisement

Preparation

Part Names and Usage

Main Unit (Front)

D
Power LED
Shows the power status. The LED is green when the power is on and off when the power is off.
Remote Control Signal Receiver
Receives Remote Control signals. The maximum range of reception is approximately 8 m from front of the
unit, and approximately 3 m from 20° on each side, total 40°.
Headset Input-Output Terminal
Used to connect a headset to the unit (Page 27).
Note
If a headset is connected, audio from the other party can be heard through the headset. Audio is
not played through the display or speakers.
If a headset is connected, how audio is sent to the other party differs depending on the type of
devices connected as follows:
Boundary Microphone
General-purpose microphone
Boundary Microphone and
general-purpose microphone
Power button
Turns the power on and off (Page 29).
Status LED
Shows the operational status of the unit (Page 23).
18
User Manual
A
Connected Device
B
E
Audio Sent to Other Party
Audio is picked up only by the headset microphone. Audio
is not picked up by the Boundary Microphones.
Both the general-purpose microphones and the headset
microphone pick up audio.
Both the general-purpose microphones and the headset
microphone pick up audio. The Boundary Microphones do
not pick up audio.
C

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-vc600

Table of Contents