Contacts And Settings; Adding Contacts To The Contact List; Registering A New Contact - Panasonic KX-VC300 User Manual

Contacts and Settings

Adding Contacts to the
Contact List
You can register the information of up to 300 contacts
in the contact list.
Note
•
If a video conference call is received while data
is being entered, a dialogue box to confirm if you
answer a video conference call is displayed.
Use [ ][ ] to select "Yes" or "No" and press
[Enter].
•
When "Yes" is selected, you can answer a
video conference call while any unsaved
data is lost.
•
When "No" is selected, you can continue
entering the data.

Registering a New Contact

Registering a Single-party Contact
1.
Press [Menu].
•
The Menu screen is displayed.
2.
Use [ ][ ] to select "New Contact" and press
[Enter].
•
The contact list registration screen is displayed.
86 User Manual
3.
Use [ ][ ] to select the following items for input:
"Group/Site": Enter a name for the contact (up to
24 characters) (Page 125).
"Speed Dial": Enter a speed dial number (1–300).
"Multi-Point": Use [
"Address": Enter an IP address, SIP URI (or SIP
user name), H.323 extension, H.323 name, or
MCU's conference room number@IP address.
"Call Type": Use [
(SIP or H.323).
Note
•
When entering an IP address, if the IP
address contains 1 or 2 digit numbers, enter
these numbers as they are. Do not enter like
[.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
•
The characters that can be input are as
follows:
SIP user name/H.323 name/MCU's
conference room number: Alphanumeric
characters and the symbols . = * + _ - $
! ? / ' ( ) (up to 60 characters)
SIP domain name: Alphanumeric
characters and the symbols . and - (up to
128 characters)
H.323 extension: Numeric characters and
the symbols # and * (up to 20 characters)
•
If the other party has the same SIP domain
name as yours, you can register only their
SIP user name. If the other party has a
different SIP domain name from yours, their
SIP domain name must be entered along
with their SIP user name.
•
If the SIP domain name is not entered, your
own SIP domain name is automatically
appended to the registered contact. This
may result in a different, unintended party
being registered as a contact, so be careful
when entering a contact's information.
•
Enter a standards-compliant value.
For details, contact your network
administrator.
4.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
5.
Use [ ][ ] to select "Yes" and press [Enter].
•
The contact list screen is displayed.
][ ] to select "No".
][ ] to select the call type