Starting A Video Conference Call; Making A Video Conference Call - Panasonic KX-VC300 User Manual

Using KX-VC Series NAT Traversal Service

Starting a Video Conference Call

Note
•
Check that "NAT Traversal Mode" is displayed along with a 7-digit Terminal ID in the upper right of
the Home screen. If "NAT Traversal Mode" is not displayed, change the connection mode to "NAT
Traversal Mode" (Page 13). If the Terminal ID is not displayed, refer to "Unit".

Making a Video Conference Call

Calling Using Speed Dial
Note
•
To call using speed dial, you need to have a speed dial number programmed in "Speed Dial" in the
contact list (Page 22).
Operation with the Remote Control
1 Press [Home].
•
The Home screen is displayed.
2 With the dial keys, enter a One-Touch Connection number
(1 to 5).
•
The information registered in the selected One-Touch
Connection number is displayed.
3 Press [Start].
•
The party registered in the selected One-Touch
Connection number is called.
•
You can also start the call pressing [Enter].
4 When you want to end the call, press [End].
•
The Home screen is displayed.
24 NAT Traversal Service User's Guide
3
1
2
Document Version 2012-03
4