Panasonic KX-VC300 User Manual page 10

For Your Safety
Do not attempt to repair the power cord,
plug, or AC adaptor. If the power cord or
plug is damaged or frayed, contact an
authorised service representative for a
replacement.
Ensure that the plug connection is free
of dust. In a damp environment, a
contaminated connector can draw a
significant amount of current that can
generate heat, and eventually cause fire
if left unattended over an extended
period of time.
Stop operation immediately if the unit
emits smoke, excessive heat, abnormal
smell or unusual noise. These conditions
can cause fire or electric shock.
Immediately turn the unit off, and unplug
the power cord, and contact your dealer
for service.
Never touch the plug or AC adaptor with
wet hands. Danger of electric shock
exists.
When disconnecting the unit, grasp the
plug instead of the cord. Pulling on a
cord forcibly can damage it, and cause
fire or electric shock.
During thunderstorms, do not touch the
unit, plug and AC adaptor. It may cause
an electric shock.
Operating Safeguards
Do not alter the AC adaptor or modify
any parts. Alteration or modification can
cause fire or electric shock.
If metal fragments or water gets into the
unit, turn the unit off and unplug the unit
immediately. Contact your dealer for
service. Operating the contaminated unit
can cause fire or electric shock.
Do not use a unit in the vicinity of a gas
leak to report the leak.
Do not place the remote control in
microwave ovens or on induction
cookware.
10 User Manual
Clean the AC plug periodically with a
soft, dry cloth to remove dust and other
debris.
Do not use the supplied power cord with
any other device. It may cause fire or
electric shock.
Unplug the unit from the AC outlet and
have it serviced by qualified service
personnel in the following cases:
a.
If the unit does not operate
according to the operating
instructions. Adjust only the controls
that are explained in the operating
instructions. Improper adjustment of
other controls may result in damage
and may require service by a
qualified technician to restore the
unit to normal operation.
b.
If the unit has been dropped or the
cabinet has been damaged.
c.
If unit performance deteriorates.
If damage to the unit exposes any
internal parts, disconnect the power cord
immediately and return the unit to your
dealer.
A headset's earpiece is magnetised and
may retain small ferrous objects.
Do not use your headset at a high
volume. The use of excessive sound
volume through a headset may cause
hearing loss.
Installation
Do not install the unit in any other way
than described in relevant manuals.
Do not touch the unit, AC adaptor, AC
adaptor cord, or power cord during a
lightning storm.
Only connect the unit to the type of
electric power specified on the label
affixed to the unit. Confirm the type of
electric power supplied to the installation
site if necessary.