Components Of The Rear Suspension Supplied As Spare Parts - Fiat Bravo Service Manual

Suspension and wheels
Rear suspension
Bravo-Brava
44.
COMPONENTS OF THE REAR SUSPENSION SUPPLIED AS SPARE PARTS
1. Rear torsion beam - 2. Rubber buffers - 3. Damper top mounting bolt - 4. Coil spring - 5. Damper -
6. Bottom nut and bolt securing damper to trailing arm - 7. Cast iron trailing arm - 8. Anti-roll bar - 9. Nut
and bolt securing trailing arm to rear torsion beam - 10. Stub axle - 1 1 . Wheel hub - 12. Nut securing stub
axle and wheel hub -13. Hub dust cap
Wheel hub
If the wheel bearing has to be replaced because
of noisiness or excessive play, the hub complete
with bearing will have to be replaced. \
Stub axle
The stub axle must not be cracked, deformed or
worn, otherwise it will have to be replaced.
Damper
If faults attributable to the damper are found, the
entire damper assembly should always be replaced.
Coil spring 13
Make sure that it is not cracked or deformed such that its efficiency is impaired.
NOTE The coil springs are divided into two categories identified by a yellow or green strip of paint on
the central coil. Springs of the same category must be fitted.
28 Publication no. 506.670