Fiat Bravo Service Manual page 260

Engine
Fuel system
Bravo-Brava Q l
16v
10.
Removing-refitting electric fuel pump
Proceed with the removal of the pump as fol­
lows:
- working from the luggage compartment,
remove the cover to gain access to the
pump housing cover;
- undo the three fixing bolts (arrow) and re­
move the cover (1);
- undo the union (2) fixing the breather pipe
and remove the pipe;
- disconnect the electrical connector for the
fuel level gauge (3) and the one for the
pump (4) supply;
- remove the rapid attachment fuel supply
(5) and return (6) unions from the tray;
NOTE When removing and refitting the ra­
pid unions, refer to the procedures
given in the service notes.
fit tool 1860893000 on the tray
fixing flange, taking care to in­
sert it correctly between the
projections on the flange, as
shown in the diagram;
undo the flange and remove it together
with the tool, then carefully remove the tray
complete with seal.
48 Print no. 506.670