Clutch
Clutch operation
Bravo-Brava
18.
Version without air conditioning
Version with air conditioning
Release the clutch cable from the anchor
ages (1) on the bodyshell as illustrated in
the diagrams above at the side (for 1581 -
1747 - 1929 D versions only).
Lift up the carpet (1) near the clutch ped
al.
Disconnect the end (3) of the clutch cable
from the pedal (2) (for all versions).
From inside the engine compartment, re
move the flexible buffer from the anchor
age hole in the dashboard bulkhead and
extract the complete clutch cable (for all
versions).
When refitting the clutch cable it is
necessary to position the flexible rub
ber buffer (1) on the dashboard bulk
head and then insert the rigid buffer
(2) in the opening in the flexible
buffer. When the operation is com
pleted, check and adjust the pedal
travel as described previously. For the
1581-1747 -1929 D versions, take
care when refitting the cable in the
mountings on the gearbox or else the
cable will deteriorate.
REMOVING-REFITTING HYDRAULICAL-
LY OPERATED CLUTCH COMPONENTS
(1998 20v)
CLUTCH PUMP
4. Remove the air intake duct acting on the
bolts shown in the diagram.
Disconnect the positive battery pole and
remove the battery from the engine com
partment working on the nut fixing the re
taining bracket.
8
IX-95 - Cancels and replaces
Print no. 506.670/03