Bravo-Brava lg|
12v
Engine
Fuel system
10.
Deleting errors
When the frequency counter reaches 0, the fault and associated parameters are deleted.
The entire error memory is cleared immediately in the following cases:
- by means of a "clear error memory" command sent by the tester;
- by interrupting ECU supply (by disconnecting the battery or ECU connector).
Diagnosis using Fiat/Lancia tester
Connect the Fiat/Lancia Tester (F.LT.) to a socket beside the ECU.
Information is exchanged between ECU and Tester via a two-way serial line (line K) using standard
Bosch communication Protocol.
The Tester is able to perform the following functions:
- Error display;
- Engine parameter display;
- Active diagnosis
List of errors
RPM sensor
Throttle potentiometer
Air temperature sensor
Coolant temperature sensor
Lambda probe
Incorrect signal (circuit open)
Loss of synchronism (implausible signal)
Race 1 defective - Race 2 defective - Synchro
nisation error between races
A.C.-D.C.
A.C.-D.C- False contact - Implausible signal
A.C.-D.C- Limit reached for lambda recon
struction and self-adaptive factor
Idle speed actuator
Control unit
Detonation sensor
Fiat CODE
A.C.-D.C.
ECU memory anomalies indicated
A.C.-D.C.
Code not recognised or not received
Copyright Fiat Auto
45