Fiat Bravo Service Manual page 348

Gearbox and differential
Removing-refitting
Bravo-Brava
]
gpi
21-27.
1. Remove the engine mounting, gearbox side.
2. Remove the bottom bolts securing the
bellhousing to the engine block.
3. Manoeuvre the hydraulic jack, to disen­
gage the gearbox from the attachment
studs and surrounding components.
Gradually lower the jack and withdraw the
gearbox complete with drive shafts. If this
operation proves difficult, remove the at­
tachments securing the first section of the
exhaust pipe to the manifold, to allow the
engine to move forwards and so facilitate
withdrawal of the gearbox.
4. If the gearbox has to be overhauled, drain
the oil by undoing the plug indicated, and
disconnect the two drive shafts by remov­
ing the gaiter clips.
66 Publication no. 506.670