Fiat Bravo Service Manual page 347

Bravo-Brava
!
8P'»
Copyright Fiat Auto
Gearbox and differential
Removing-refitting
21-27.
1. Remove the bottom flywheel guard from
the bellhousing.
2. Undo the bolt shown in the figure on the
bellhousing, to enable the gearbox sup­
port tool to be installed.
3. Remove the power unit central mounting
to enable the gearbox support tool to be
subsequently installed.
4-5. Place the gearbox support tool
1860873000 on the hydraulic jack, then
secure it to the gearbox at the points
shown in the figure (front view and rear
view).
65