Engine
Fuel system
Bravo-Brava 10k
lev
10.
P4A28BJ01
BUTTERFLY POSITION SENSOR
It is made up of a single track potentiometer
where the moving part is rotated by the ac
celerator butterfly shaft.
Wiring connector
COOLANT TEMPERATURE SENSOR
The sensor is fitted on the thermostat.
It is made up of a brass casing which protects
the resistive element made up of an NTC
(Negative Temperature Coefficient) thermis
tor where the electrical resistance decreases
as the temperature increases.
The reference voltage is 5 Volt: since the con
trol unit input circuit is designed as a voltage
divider, the reference voltage is shared be
tween a resistance in the control unit and the
actual sensor.
As a result the control unit is capable of eval
uating the variations in the sensor resistance
through the changes in voltage.
Wiring connector
P4A28BJ04
28
Print no. 506.670