Gearbox and differential
Drive shafts
21-27.
44
Bravo-Brava ^ 16v
DISMANTLING
1. Remove the clip and the protective gaiter
on the constant velocity joint, wheel side.
During assembly, it is advisable to re
place the protective gaiter.
2. Clean the grease off the inside of the con
stant velocity joint and, using tools
1847017001 and 1860889000, remove
the constant velocity joint and then with
draw the protective gaiter, previously mo
ved aside, from the drive shaft.
3. Remove the protective cover from the
constant velocity joint, gearbox side.
4. Remove the two clips securing the protec
tive gaiter on the gearbox side, then re
move it.
5. Clean the grease off the inside of the con
stant velocity joint and remove the circlip
from its seating.
Publication no. 506.670