Custom Service Menu Access Count Clear (Cclr); Message Waiting Lamp Retry Times (Mwl) - Panasonic KX-TVS75 Installation Manual

7.2 UTILITY COMMANDS
Access: 3:
Menu Msg.:
None:
[1]-Xfer Mbx
(101):
[2]-Xfer Extn
(102):
[3]-Custom [21]: Indicates that the caller will be sent to Custom Service 21

7.2.12 Custom Service Menu Access Count Clear (CCLR)

Each Custom Service has an access counter that counts the number times the service has been
accessed. This command clears this counter.
Type CCLR, Press Space, and Enter Custom Service Menu (1-100), then Press RETURN.
$ CCLR 20
Custom Menu <20> Accessing Counter Cleared !!
Note
Type CCLR 0 to clear the access counters of all Custom Services.

7.2.13 Message Waiting Lamp Retry Times (MWL)

This command is used to specify the number of times the VPS will attempt to turn on the
Message Waiting Lamp of the called extension. This setting is required when a PBX other than
the Panasonic KX-T series telephone system is used.
$ MWL
Current Setting of M.W.L. Retry Count is 1
Enter M.W.L. Retry Count (1-3) =
Note
This setting is not valid if "Message Waiting Lamp for Every Message" is set to "Yes."
148
Indicates that this Custom Service was accessed 3 times
by callers. This counter can be cleared, See
7.2.12 Custom Service Menu Access Count Clear
(CCLR).
Indicates that the menu message for a Custom service is
"None (not recorded)".
Indicates that the caller will be transferred to the mailbox
101 by pressing [1]. If menu message is recorded, "Rec"
will appear.
Indicates that the caller will be transferred to the
extension 102 by pressing [2].
by pressing [3].
SYSTEM MAINTENANCE AND TROUBLESHOOTING