B2 System Administration - Mailboxes - Panasonic KX-TVS75 Installation Manual

B2 SYSTEM ADMINISTRATION - MAILBOXES

Up to 62 (TVS75/100), 1022 (TVS200) Subscriber mailboxes can be created or edited by
following the correct sequence of steps.
To access the proper menu for mailbox setup, follow the menu path as shown:
System Administration Top Menu - 1 - 1 - 1 - Maibox No.
Parameter
Mailbox
Number
Editing Mailboxes
The parameters of each mailbox can be edited based upon the needs of the Subscriber.
To access the proper menu for mailbox editing, follow the menu path as shown:
System Administration Top Menu - 1 - 1 - 1 - Mailbox No. - 1
Parameter
The Extension
of the Owner
SYSTEM ADMINISTRATION
Value Range
(Default)
2-5 digits Specifies the Subscriber's mailbox number. Mailbox number
(None) length is determined during setup or when initializing the
system. Mailbox numbers cannot begin with zero. If the
length of the mailbox number has been defined as 3 digits, for
example, the valid range for all mailbox numbers would be
100 through 997 (998 and 999 would be reserved for the
Message Manager and the System Manager). The length of
the mailbox number cannot be changed through the Mailbox
Setting screen once it has been specified.
Value Range
(Default)
2-5 digits Used to transfer calls through the VPS to a Subscriber's
(None) mailbox.
Any valid extension number including an Extension Group
List number can be assigned.
Note: If an Extension Group List number is assigned to a
mailbox, all group members are able to share the information
stored there.
B2 SYSTEM ADMINISTRATION - MAILBOXES
Table 4 1
Description/Function
Table 4 2
Description/Function
195