Connecting The Kx-Tvs75/100/200 With The Panasonic Kx-Td816, Kx-Td1232 And Kx-Td308; Kx-Td1232 Software Verification And Programming For Digital Integration Via The Manager's Extension - Panasonic KX-TVS75 Installation Manual

4.2 CONNECTING THE KX-TVS75/100/200 WITH THE PANASONIC KX-TD816, KX-TD1232 AND KX-TD308

4.2 CONNECTING THE KX-TVS75/100/200 WITH
THE PANASONIC KX-TD816, KX-TD1232 AND
KX-TD308
Note
Do not use system programs [106] or [602] for DPT. The following 2 Sections (4.2.1 KX-
TD1232 Software Verification and Programming for Digital Integration via the Manager's
Extension and 4.2.2 KX-TD1232 Software Verification and Programming via the Operating
and Maintenance tool) are for the KX-TD1232 as examples. Please refer to them for the KX-
TD816.
And the following Section (4.2.3 KX-TD308 Programming for Digital Integration via the
Manager's Extension) is for the KX-TD308.
4.2.1 KX-TD1232 Software Verification and Programming for
Digital Integration via the Manager's Extension
It is important that the KX-TD1232 have the proper software level to allow Digital Integration
with the VPS. Follow the procedures below to confirm the software level, then complete the
required programming before starting up the VPS.
Note
Two methods of programming are available on the KX-TD1232. The instructions below
show how to program without the operating and maintenance tool. For instructions on
programming with the operating and maintenance tool, please see KX-TD1232 Software
Verification and Programming via the Operating and Maintenance Tool.
All of the following procedures must be done after entering system programming. Refer
to the KX-TD1232 Installation Manual for instructions on how to enter the system
programming mode.
Software Verification
1.
Verify Software - If you are configuring a 2-cabinet system, remember to check both
cabinets. The software must be the same in each. Check the software version of the KX-
TD1232 by using System Program [116]. Example: P101A50508B
The underlined digits represent the software production date code (for mat YMMDD). In
this example, the date code is May 8, 1995 (year, month, day). For Digital Integration, the
software production date of the PBX must be May 8, 1995 or later.
(For KX-TD816, the version must be version P401A dated 09-05-96 or higher for Digital
Integration to be utilized. For KX-TD308, any version can be used for Digital Integration.)
If the software version of the PBX is lower than this, call National Parts Center (1-800-
833-9626) to order a software upgrade.
INTEGRATING THE VPS WITH THE PANASONIC KX-TD DIGITAL PBX
77