Service Access Commands - Panasonic KX-TVP50 Subscriber's Manual

Section 1 Mailbox Setup

1.5 Service Access Commands

Before routinely using the VPS, you should familiarise yourself with the Service Access
Commands shown in the Appendix.
The most important ones are the following:
#6 — pressing this during system prompts activates Voice Mail Service. You can
record a message after entering a mailbox number at the prompt. You can
also press
#8 — pressing this during system prompts activates Automated Attendant
Service. It prompts you for an extension number and then attempts to call
your party. If she cannot take the call, the VPS will take some suitable action.
Note
If you call the extension directly, the VPS cannot help you.
— pressing this during system prompts takes you to the previous VPS menu. If
you have lost your bearings within Subscriber Service, use this command to
get you out.
0 — pressing this lets you listen to the whole menu (for Help).
10
followed by your own mailbox number to log into your mailbox.