Error Log Display (Elog) - Panasonic KX-TVS75 Installation Manual

1.
Type PSET, then Press RETURN.
$ PSET
Report Print Out Service [ Disable ]
1 : Enable 2: Disable : =
2.
Type [1] to enable this function or Type [2] to disable it.
Enter The Print Out Time (HH:MM, AM/PM) : =
3.
Type the time to print the reports.
Note
The reports will be displayed only if the system is in the mode where the ">" prompt is
displayed.

7.2.6 Error Log Display (ELOG)

This command is used when diagnosing VPS problems. When selected, this command will
display an error log.
COM. Communication error between CPU and Port cards
DATA Process error of voice data
MEM. Memory error
PRG. Program error in CPU card
R/W Read/Write error of Hard disk
Type ELOG, then Press RETURN.
$ ELOG
Note
The errors that can be identified by the system are displayed and explained in the
following tables.
SYSTEM MAINTENANCE AND TROUBLESHOOTING
DEVICE ERROR
1. CPU MEM-GET
2. CLOCK
3. DISK DATA R/W (xx:yyyy)
4. DSP* SCAN
5. DSP* FIFO
6. CPU APPLICATION (x)
* = Port number
7.2 UTILITY COMMANDS
TIME
JUL-14 14:00 PM
JUL-14 14:00 PM
JUL-14 14:00 PM
JUL-14 14:00 PM
JUL-14 14:00 PM
JUL-14 14:00 PM
141