Maintenance Menu - Sony HXCU-100 Service Manual

4-3. MAINTENANCE Menu

M01: SERIAL NO SET
Menu screen
< S E R I A L N O S E T > M 0 1 T O P
→
S E R I A L N O : 0 0 0 0 0 0 0 0
N A M E : H X C U - 1 0 0
D E S T : S Y L
W R I T E
E D I T C A N C E L
T I M E R - R E S E T
F A C T O R Y - R E C A L L
Processing result indication
SettingItem Normal end
WRITE SERIAL NO WRITE OK
EDIT-CANCEL EDIT DATA CANCEL OK
4-12 (E)
Item Setting
SERIAL NO 00000000 to
99999999
NAME HXCU-100
DEST SYL Common
J Japan
CN China
UC United States
CE Europe
WRITE
EDIT CANCEL
TIMER-RESET
FACTORY-
RECALL
Abnormal end
EEPROM WRITE PRO-
TECTED
MODEL NAME IS WRONG
DEST NAME IS WRONG
SERIAL NO WRITE NG
_
Description
The setup information is stored in
the EEPROM (IC801) on the
SY-364 board.
To change the setup information,
set S801-1 (PROTECT) on the
SY-364 board to OFF.
Writes the above setup information to
the EEPROM.
Place the cursor at "WRITE" and turn
the CANCEL/ENTER lever to the
ENTER side.
A message "SERIAL NO WRITE OK?"
appears.
Turn the CANCEL/ENTER lever to the
ENTER side again to perform the
processing.
Restores the setup information
during editing to the previous
information before editing.
Place the cursor at "EDIT-CANCEL"
and turn the CANCEL/ENTER lever
to the ENTER side.
A message "EDIT DATA CANCEL
OK?" appears.
Turn the CANCEL/ENTER lever to
the ENTER side again to perform
the processing.
Resets the timer for displaying
power-on hours.
Resets all the setting values except
the following items to the factory
settings
. Media access control (MAC)
address
. Serial number
. Power-on hours display timer
. Setting values stored in the
EEPROM on the DPR-300 board
through the PLD.
Description
S801-1 (PROTECT) on the
SY-364 board is set to ON.
The NAME (model name) setting
is not correct.
The DEST (destination) setting
is not correct.
Data cannot be written to the
EEPROM.
HXCU-100