Sony HXCU-100 Service Manual page 44

CN-3082 Board
This board provides two channels of MIC signal output.
CN-3083 Board
This board contains an intercom connector (XLR-5, female).
FL-349 Board
This board handles the RF signal and DC power voltage for CAM, which are sent to the camera with the
TRIAX cable.
This board contains a TRIAX connector and connectors for connection to the PS-739 and DPR-300
boards.
SDI-97 Board
This board outputs four systems of the HD/SD-SDI signal to external devices and outputs two systems of
the VBS signal.
This board interfaces the following signals between the DPR-300 board and the CN-3080 board.
PIX signal, WF signal, HD/SD component signals, HD/SD sync signals, stair case signal, prompter signal,
and RCP control signals
VIF-39 Board
This board contains a reference input connector for external synchronization. It inputs two systems of the
HD/SD-SDI return signal from external devices and inputs two systems of the composite analog return
signal.
This board interfaces the MIC signal between the SY-364 board and the CN-3082 board. In addition, this
board contains a LAN connector for communication with external devices, and interfaces with the SY-364
board.
MB-1124 Board
This board is the motherboard of this unit. It only contains connectors for plug-in boards for interface
wiring between them.
2-18 (E)
HXCU-100