4-3.
MAINTENANCE Menu
M01: SERIAL NO SET
Menu screen
< S E R I A L N O S E T >
M 0 1 T O P
→
S E R I A L N O : 0 0 0 0 0 0 0 0
N A M E : H X C U - F B 7 0
D E S T : S Y L
W R I T E
E D I T C A N C E L
T I M E R - R E S E T
F A C T O R Y - R E C A L L
Processing result indication
Setting Item
WRITE
EDIT-CANCEL
HXCU-FB70
Item
Setting
SERIAL NO
00000000 to 99999999
NAME
HXCU-FB70
DEST
SYL
Common
J
Japan
UC
United States
CE
Europe
WRITE
EDIT CANCEL
TIME-RESET
FACTORY-RE-
CALL
Normal end
Abnormal end
SERIAL NO
MODEL NAME IS
WRITE OK
WRONG
DEST NAME IS
WRONG
SERIAL NO
WRITE NG
EDIT DATA
—
CANCEL OK
Description
The setup information is stored in
the EEPROM (IC309) on the
DPR-337F board.
Writes the above setup information
to the EEPROM. Place the cursor
at "WRITE" and turn the CAN-
CEL/ENTER lever to the ENTER
side. A message "SERIAL NO
WRITE OK?" appears.
Turn the CANCEL/ENTER lever
to the ENTER side again to per-
form the processing.
Restores the setup information
during editing to the previous in-
formation before editing.
Place the cursor at "EDIT-CAN-
CEL" and turn the CANCEL/
ENTER lever to the ENTER side.
A message "EDIT DATA CAN-
CEL OK?" appears.
Turn the CANCEL/ENTER lever
to the ENTER side again to per-
form the processing.
Resets the timer for displaying
power-on hours.
Resets all the setting values except
the following items to the factory
settings.
•
Media access control (MAC)
address
•
Serial number
•
Power-on hours display timer
•
Setting values stored in the
EEPROM on the DPR-337F
board through the PLD.
Description
The NAME (model name) set-
ting is not correct.
The DEST (destination) setting
is not correct.
Data cannot be written to the
EEPROM.
4-13