Mounting The Unit In A 19-Inch Rack; Preparations - Sony HXCU-100 Service Manual

1-8. Mounting the Unit in a 19-Inch Rack

This unit can be mounted in a 19-inch EIA standard rack (height: 1.5U).
w
. Secure the rack to the fl oor.
If the rack falls due to the weight of equipment, it may result in death or serious injury.
Secure the rack to the fl oor without fail to prevent it from falling or moving.
. Do not mount the unit at a fl oor height of more than 1 m.
Fall of the rack may result in death or serious injury.
Mount the unit in the rack that is secured to the fl oor at a fl oor height within about 1 m.

Preparations

c
Be sure to use specifi ed rack-mount rails.
If unspecifi ed rack-mount rails are used, the equipment in the rack may fall due to insuffi cient strength,
which may result in injury.
[Part]
. Slide rail
Accuride Japan Model 305A-18 (457 mm)
. Front bracket
Sony Part No.: 2-142-214-01
. Rear bracket
Sony Part No.:2-142-215-01
. Screw (B4 x 8)
. Screw (B5 x 8)
. Screw (PWH4 x 20)
. Nut
. Plate nut
Sony Part No.: 3-651-812-00
. Rack mount rail screw (PSW5 x 25):
Manufacturer: Accuride Japan
HXCU-100
[Quantity]
[1 set]
[2]
[2]
[14]
[8]
[2]
[2]
[2]
[4]
1-13 (E)