Mounting The Unit In The Rack - Sony HXCU-100 Service Manual

Mounting the Unit in the Rack

This unit is mounted in the rack by attaching the inner rails at the upper or lower part 1U of height 1.5U.
The rail attaching position varies depending on the unit mounting height in the rack.
Inner rail
1.5U
1.5U
1. Pull out the inner rail while pressing the rail
stopper.
2. Install the inner rail to the unit with six
screws (B4 x 8).
n
This fi gure shows attaching the inner rails at
the upper part.
The same method applies for attaching the
inner rails at the lower part.
1-14 (E)
Inner rail
Other equipment
HXCU-100
HXCU-100
Other equipment
Outer rail
Inner rail
B4 x 8
When mounting this unit under other equipment,
install the inner rail at the upper part (1U) of the
unit.
When mounting this unit above other equipment,
install the inner rail at the lower part (1U) of the
unit.
Stopper
Inner rail
1U
0.5U
0.5U
1U
Inner rail
B4 x 8
HXCU-100