Mounting The Unit In A Rack; Connections; Connecting The Monitor - Sony BKM-16R Operation Manual

Mounting the Unit in a
Rack
To mount the unit in an EIA standard 19-inch rack, use the
supplied rack mount brackets and screws.
1
Remove the five feet from the bottom of the unit.
2
Attach the rack mount brackets to each side of the unit
with the rack mount attachment screws.
Rack mount bracket
3
Screw the rack mount brackets to the rack to mount the
unit. (Use the commercially available screws that
match the size of the rack's holes.)
Rack
12
Mounting the Unit in a Rack / Connections
BKM-16R (this unit)
Rack mount attachment screws

Connections

The illustrations of the monitor used in this manual are
BVM-E250.
Note on connecting the cable to the DC 5V/12V
IN connector
Be sure to plug the female connector of the cable into the
DC 5V/12V IN connector on the unit.
Connect the connector to the shape of the DC 5V/12V IN
connector.
Plug the female
connector.

Connecting the Monitor

Monitor
NETWORK switch
t Set to PEER TO
PEER.
LAN (10/100) connector
SMF-700, etc.
DC 5V/12V IN
BKM-16R
connector
(this unit)
NETWORK switch
tSet to PEER TO PEER.
DC 5V OUT
connector
LAN (10/100)
connector