USER'S MANUAL - SETTING MODE
USB Port Emulation Switching
If the machine is connected using the USB port, select the emulated
printer language.
The following settings can be configured.
•
Auto
•
Post Script
•
PCL
•
T h e s e t t i n g s a r e t h e s a m e a s t h o s e o f "
S w i t c h i n g
•
U n l e s s p r i n t e r e r r o r s o c c u r f r e q u e n t l y , i t i s r e c o m m e n d e d t h a t
y o u u s e t h e f a c t o r y d e f a u l t s e t t i n g " A u t o " .
Enable Network Port
Enables printing from the network port.
Network Port Emulation Switching
This setting is used to select the emulated printer language when the
machine is connected by a network port.
The following settings can be configured.
•
Auto
•
Post Script
•
PCL
•
T h e s e t t i n g s a r e t h e s a m e a s t h o s e o f "
S w i t c h i n g
file://C:\Files\PM Files\COPIERS\CR3.5\Virgo II\Manuals downloaded from MFP\mx514...
" .
" .
Page 215 of 384
N e t w o r k P o r t E m u l a t i o n
U S B P o r t E m u l a t i o n
4/24/2014