USER'S MANUAL - SETTING MODE
AUTHORITY GROUP LIST
This is used to store the settings relevant to user authorities in advance
for each group. The authority of each user is specified by selecting one
of these registered groups when the user is registered.
•
[Add] key
Use this to add a new group.
•
List display
This shows the currently stored groups. Selecting a group name
displays the edit screen for that group.
Storing authority groups
When you tap the [Add] key, the registration screen appears. Up to 20
groups can be registered.
For detailed information about each of the settings, see
and factory default settings of template
Editing an authority group
Selecting a group from the list displays the edit screen for that group.
For detailed information about each of the settings, see
and factory default settings of template
To return a group to the factory default state, select the group from
the list and select any of options [Return to the Administrator
Authority], [Return to the system administrator authority.], [Return to
the User Authority], [Return to the Guest Authority], [Return to the
color prohibited authority.] and [Return to the scanner prohibited
authority.].
Tapping the [Execute] key resets the group status to the factory
default.
List of settings and factory default settings of template
groups
file://C:\Files\PM Files\COPIERS\CR3.5\Virgo II\Manuals downloaded from MFP\mx514...
"List of settings
groups".
"List of settings
groups".
Page 133 of 384
4/24/2014