USER'S MANUAL - SETTING MODE
•
I f A u t o R e c e i v e R e d u c e i s d i s a b l e d , t h e e d g e s o f t h e i m a g e
o u t s i d e t h e s t a n d a r d s i z e w i l l b e c u t o f f . H o w e v e r , t h e i m a g e w i l l
b e c l e a r e r b e c a u s e i t w i l l b e p r i n t e d a t t h e s a m e s i z e a s t h e
o r i g i n a l .
•
S t a n d a r d s i z e s a r e s i z e s s u c h a s 8 - 1 / 2 " x 1 1 " a n d 8 - 1 / 2 " x 5 -
1 / 2 " ( A 4 a n d B 5 ) .
Print Style Setting
This setting determines the paper selection condition when printing
received faxes. Select one of the three conditions below.
Print Actual Size Cut off Disabled
The received fax image is printed at full size without dividing it onto
multiple sheets of paper. If the same size of paper or larger paper is
not loaded, the fax will be received in memory and will not be printed
until a suitable size of paper is loaded.
However, if the received fax is longer than 11" x 17" (A3) size, it will
be automatically divided onto multiple sheets of paper.
Print Actual Size Cut off Enabled
Each received image is printed at full size. If necessary, the image is
divided onto multiple sheets of paper.
Auto Size Select
Each received image is printed at full size when possible. When not
possible, the image is automatically reduced before printing.
Set the Telephone Number for Data Forwarding
When a problem prevents the machine from printing a received fax,
the received fax can be forwarded to another fax machine. This setting
is used to program the fax number of the destination fax machine. Only
one forwarding fax number can be programmed (maximum of 64
digits).
To insert a pause between digits of the number, tap the [-] key.
If you wish to specify an F-code confidential memory box in the
file://C:\Files\PM Files\COPIERS\CR3.5\Virgo II\Manuals downloaded from MFP\mx514...
Page 381 of 384
4/24/2014