USER'S MANUAL - SETTING MODE
Initial Resolution Settings
One of the following resolutions can be selected for the default
resolution for transmission.
•
100 X 100 dpi
•
150 X 150 dpi
•
200 X 200 dpi
•
300 X 300 dpi
•
400 X 400 dpi
•
600 X 600 dpi
Scan Complete Sound Setting
Adjusts the volume of the beep that sounds when scanning ends. The
beep can also be turned off.
Default Output Tray
Selects the default output tray for printing a file stored by Scan to
HDD.
The items that appear will vary depending the machine configuration.
Disabling Text/Stamp printing at Reprint
When a stored file is retrieved and printed, the printing functions are
disabled.
This function prevents an inconsistency of the date between the
original data and output data and others.
Batch Print Settings
When printing files by batch printing, this setting is used to prohibit the
selection of the [All Users] key and the [User Unknown] key in the user
selection screen.
Erase Width Adjustment
Sets the default erase width for erase function.
Specify a value from 0" (0 mm) to 1" (25 mm) in increments of 1/8" (3
mm) for both edge erase and center erase.
file://C:\Files\PM Files\COPIERS\CR3.5\Virgo II\Manuals downloaded from MFP\mx514...
Page 243 of 384
4/24/2014