USER'S MANUAL - IMAGE SEND
BEFORE USING THE NETWORK
SCANNER
To use the machine as a network scanner, you must store sender
information, configure server settings, store destinations in the address
book, and perform other required operations.
Make sure the main power switch is in the "
When the main power indicator is lit up, the main power is in the
"
" position. If the main power indicator is not lit up, turn the
main power switch to the "
button on the operation panel.
*
If the fax function will be used, and in particular if reception or
timer transmission will take place at night, always keep the
main power switch in the "
Checking the date and time
Verify that the correct date and time are set in the machine.
T o s e t t h e d a t e a n d t i m e o f t h e m a c h i n e :
file://C:\Files\PM Files\COPIERS\CR3.5\Virgo II\Manuals downloaded from MFP\mx514...
" position and press the [POWER]
" position.
Page 4 of 191
" position
4/24/2014