U631 Setting Communication Control; Setting Ecm Transmission; Setting Ecm Reception; Setting The Frequency Of The Ced Signal - Kyocera KM-1820 Service Manual

Maintenance
item No.
U631 Setting communication control 2
Description
Makes settings regarding fax transmission.
Start
1. Press the enter key. The screen for selecting an item is displayed.
2. Select the item to be set using the up/down cursor keys.
3. Press the enter key. The screen for the selected item appears.
Display
1:ECM TX
2:ECM RX
3:CED FREQ.

Setting ECM transmission

To be set to OFF when reduction of transmission costs is of higher priority than image quality.
1. Change the setting using the up/down cursor keys.
Display
1: ON
2: OFF
2. Press the enter key. The value is set.
3. To return to the screen for selecting an item, press the back key.

Setting ECM reception

To be set to OFF when reduction of transmission costs is of higher priority than image quality.
1. Change the setting using the up/down cursor keys.
Display
1: ON
2: OFF
2. Press the enter key. The value is set.
3. To return to the screen for selecting an item, press the back key.

Setting the frequency of the CED signal

Sets the frequency of the CED signal. Used as one of the measures to improve transmission performance for
international communications.
1. Change the setting using the up/down cursor keys.
Display
1: 2100
2: 1100
2. Press the enter key. The value is set.
3. To return to the screen for selecting an item, press the back key.
Completion
Press the back key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.
Description
Description
Sets ECM transmission.
Sets ECM reception.
Sets the frequency of the CED signal.
Description
ECM transmission is enabled.
ECM transmission is disabled.
Description
ECM reception is enabled.
ECM reception is disabled.
Frequency of the CED signal
2100 Hz
1100 Hz
3JG
1-3-13