Media Feed Unit Drive Gear - 28 / 21 Tooth Removal - Lexmark X850e Service Manual

7500-XXX

Media feed unit drive gear - 28 / 21 tooth removal

1.
Remove the appropriate media feed unit assembly. See
page 4-20
2.
Remove the harness from the bracket (A).
3.
Remove the three screws securing the bracket (A) to the media feed unit assembly.
4.
Remove the bracket (A).
Note: The gears may become detached from the bracket (A).
5.
Remove the media feed unit drive gear - 28 / 21 tooth (B).
Clamp
Note: Before reinstalling, ensure all gears and washers are securely attached to the bracket (A).
4-42
MFP Service Manual
or "Media feed unit assembly 2 removal" on page
Harness
A
Rear
"Media feed unit assembly 1 removal" on
4-23.
Washer
B
Rear