Exit 2 Media Diverter Solenoid Removal - Lexmark X850e Service Manual

Exit 2 media diverter solenoid removal

1.
Remove the exit 2 unit assembly. See
2.
Open the exit 2 unit assembly.
3.
Remove the exit 2 left cover. See
4.
Remove the exit 2 right cover. See
5.
Disconnect the media diverter solenoid (A).
6.
Release the harness from the clamp.
7.
Remove the screw securing the media diverter solenoid (A) to the exit 2 unit assembly.
8.
Remove the media diverter solenoid (A).
9.
Move the media diverter link (B) toward the top of the exit 2 unit assembly in the direction of the arrow.
10.
Remove the media diverter link (B) from the media diverter solenoid (A).
"Exit 2 unit assembly removal" on page
"Exit 2 left cover removal" on page
"Exit 2 right cover removal" on page
A
B
4-315.
4-319.
4-320.
Front
Connector
Clamp
Repair information
7500-XXX
4-327