2000-Sheet Dual Input (Ttm)-Lift Coupling Assembly Removal - Lexmark X850e Service Manual

2000-sheet dual input (TTM)–lift coupling assembly removal
1.
Remove the media feed unit assembly. See
removal (tray 3)" on page 4-243
removal (tray 4)" on page
2.
Remove the harness from bracket (A).
3.
Remove three screws securing bracket (A) to the media feed unit assembly.
4.
Remove bracket (A).
Note: The gears may become detached from bracket (A).
5.
Remove the e-ring with a prying tool securing the tray lift coupling (B) to bracket (A).
6.
Remove the tray lift coupling gear 31 tooth (C).
7.
Remove the spring (D).
Clamp
Note: Before re-installing, ensure all gears and washers attached to bracket (A) are securely installed.
"2000-sheet dual input (TTM)–media feed unit assembly
or "2000-sheet dual input (TTM)–media feed unit assembly
4-239.
A
Rear
Washer
D
7500-XXX
E-ring
B
C
4-249
Repair information