7500-XXX
Printer left door assembly handle removal
1.
Open the printer left door assembly.
2.
Remove the printer left door assembly. See
3.
Remove the transfer roll guide assembly. See
4.
Remove five screws securing the metal frame (A) to the plastic cover (B).
5.
Remove the metal frame (A) by lifting it upward and sliding outward.
6.
Remove the three screws securing the handle cover (C).
7.
Remove the handle cover (C).
8.
Remove the printer left door assembly handle (D).
9.
Remove the spring (E).
4-78
MFP Service Manual
C
D
E
B
"Printer left door assembly removal" on page
"Transfer roll guide assembly removal" on page
4-75.
4-77.
A