Rf Switching Position Adjustment - Sony HDV HVR-1500 Service Manual

7-3. RF Switching Position Adjustment

Be sure to perform the RF switching position adjustment whenever the tape path
adjustment (refer to Section 7-2) is performed.
Perform this adjustment in the AUTO mode.
To perform the RF switching position adjustment using the alignment tape (XH5-
1A2 for 60i or XH5-1AP2 for 50i), refer the following items.
. For the procedure to enter the maintenance menu, refer to Section 4-2-2.
. For the procedure to exit the maintenance menu, refer to Section 4-2-3.
Tools
Alignment tape, XH5-1A2 : 8-967-999-22 (for 60i)
XH5-1AP2 : 8-967-999-26 (for 50i)
Adjustment procedure RF switching position
adjustment using the [AUTO adjustment]
Use the keys of 9, 0, 8, [MENU] and SET (YES) on
the front panel to perform the tracking adjustment.
1. Enter the maintenance menu.
2. Move the cursor to "TAPE PATH ADJUST" which is
displayed with a white background using the 9, 0
keys.
3. Press the 8 key.
"TAPE PATH ADJUST" is selected and its lower
layer submenu appears.
7-10
MENU
SET (YES)
9
8
0
Front panel
HVR-1500