Board; Hp-136 Board - Sony HDV HVR-1500 Service Manual

6-26-7. HP-136 Board

1. Remove the top panel. (Refer to Section 2-7-1.)
2. Remove the front panel. (Refer to Section 2-7-2.)
3. Remove the KY-616 board.
(Refer to Section 6-26-10.)
4. Remove the four screws and remove the front panel
sub assembly.
Front panel sub assembly
5. Remove the two nuts and the washer, and remove the
HP-136 board.
6. Remove the harness from the connector (CN103) on
the HP-136 board.
7. Re-attach the parts in reverse order of the
disassembling procedure.
Nuts
Washer
HVR-1500
6-26-8. HPR-20 Board
1. Remove the rear panel. (Refer to Section 2-7-4.)
2. Remove the SDI assembly. (Refer to Section 6-26-1.)
3. Remove the harness from the connector (CN101) on
4. Remove the three screws and HPR-20 board.
5. Re-attach the parts in reverse order of the
P3 x 8
P3 x 8
Harness
CN103
HB-136 board
the HPR-20 board.
disassembling procedure.
HPR-20 board
B3 x 5
CN101
Harness
6-69