Writing And Rewriting The Pld Internal Data - Sony HDV HVR-1500 Service Manual

2-16. Writing and Rewriting the PLD Internal Data

This unit uses the PLD (Programmable Logic Device).
Writing and rewriting the PLD internal data shown below supported by the e-Production (EPR) system.
If the PLD needs to be upgraded, contact your Sony Sales Office/Service Center.
e-Production system has the advantages shown below.
. To write/rewrite the PLD internal data:
1. The standard fixture (cable) can be used.
2. The standard software (PLD Download Tool) can be used.
. The PLD internal data is controlled in the Sony Database Server under the name Project file
(E_xxx_xxx_xx_xx).
. The printed circuit board is equipped with the standard connector (EPR connector) to write the PLD
internal data. The indication "EPR" is shown on the printed circuit board.
PLD supported by the e-Production
Board EPR connector Ref. No.
AVP-7 CN2
DDE-21 CN200
DVP-42 CN901
HPR-20 CN1201
KY-616 CN501
RT-10 CN201
SDI-94 CN701
CN601
SSS-12 CN401
HVR-1500
PLD Ref. No. Project File No.
IC154 E_000_003_71_xx
IC202 E_000_003_66_xx
IC805, IC10012 E_000_003_69_xx
IC805 E_000_003_67_xx
IC1001 E_000_003_68_xx
IC1203 E_000_003_70_xx
IC507 E_000_003_74_xx
IC200 E_000_003_75_xx
IC705 E_000_003_72_xx
IC601 E_000_003_73_xx
IC401 E_000_003_65_xx
2-25