4-2. How to Operate Maintenance Menu
4-2-1. Location and Function of Switches
Use 9, 0, 7, 8, [MENU], SET (YES) , [TC|RESET], RESET (NO) switches on the front panel
shown below to perform the maintenance menu.
The maintenance menu has a layered structure through which you move to select the desired item.
Use this key to move in the direction of ↑ within the same layer.
9 KEY :
Use this key to move in the direction of ↓ within the same layer.
0 KEY :
7 KEY : Use this key to move in the direction of ← to higher layers.
8 KEY : Use this key to move in the direction of → to lower layers. (It is inoperative if there is no
lower layer.)
To indicate depth of layer, the displayed menu items are indented on the monitor screen and ">" is added
to the top on the time counter display.
4-2-2. How to Enter the Maintenance Menu
1. While pressing the 7 key, press the [MENU] key. The HVR-1500 enters the maintenance menu.
The maintenance menu appears on the LCD and video monitor.
2. Select the desired item using the 9 key and the 0 key. The cursor shown with a white background
moves to the selected item.
3. After the desired item is selected, press the 8 key to designate the selected item.
4-2-3. How to Exit the Maintenance Menu
Press the [MENU] key to exit the maintenance menu.
HVR-1500
MENU
RESET (NO)
SET (YES)
TC PRESET
9
7
8
0
4-3