(2) Turn the manual eject cover clockwise and
align the two phase determining holes in the
mode gear assembly and in No.3 gear.
(3) Remove the three precision screws and
remove the rail assembly.
n
Use extreme care not to scratch the drum and
the tape guide when removing. Also great
care should be taken; not to fold and not to
scratch the flexible card wire of the LED
holder assembly when disconnecting.
6-42
Mode gear
Phase determining hole
Precision screws
P1.4 x 3.5
No.3 gear
Manual eject cover
Phase
determining
hole
Phase determining hole
Rail assembly
Flexible card wire
HVR-1500