Lcd Replacement; Removing/Installing The Switching Regulator - Sony HDV HVR-1500 Service Manual

6-24. LCD Replacement

n
When attaching the option boards, be sure to turn off the
main power.
1. Remove the top panel. (Refer to Section 2-7-1.)
2. Remove the front panel. (Refer to Section 2-7-2.)
3. Remove the KY-616 board.
(Refer to Section 6-26-10.)
4. Remove the KY-614 board.
(Refer to Section 6-26-11.)
5. Remove the LCD assembly.
(Refer to Section 6-26-11.)
6. Remove the two screws and remove the LCD.
7. Re-attach the parts in reverse order of the
disassembling procedure.
Backlight
LCD
Screw M2
HVR-1500
Screw M2
6-25. Removing/Installing the Switching
Regulator
n
Before removing the regulator, be sure to turn off the main
power.
Removal
1. Remove the top panel. (Refer to Section 2-7-1.)
2. Remove the rear panel. (Refer to Section 2-7-4.)
3. Remove the harness connected to the connector (CN2)
of the switching regulator.
4. Remove the four screws and remove the switching
regulator in the direction of the arrow.
5. Re-attach the parts in reverse order of the disassem-
bling procedure.
Switching regulator
BVTT3 x 6
CN12
MB-1098 board
CN11
BVTT3 x 6
Harness
6-65