6-26-4. DDE-22 Board
1. Remove the rear panel. (Refer to Section 2-7-4.)
2. Remove the two screws and remove the blank panel.
Rear panel
3. Insert the DDE-22 board to the specified slot and
securely connect the board to the MB-1098 board.
4. Attach the rear panel. (Refer to Section 2-7-4.)
HVR-1500
Blank panel
BV3 x 6
DDE-22 board
6-26-5. DR-428BG Board
1. Remove the top panel. (Refer to Section 2-7-1.)
2. Remove the bottom panel. (Refer to Section 2-7-2.)
3. Remove the cassette compartment.
(Refer to Section 2-8.)
4. Remove the harnesses and flexible card wires from the
seven connectors (CN4, CN10, CN11, CN3, CN19,
CN20, CN21) on the DR-428BG board.
DR-428BG board
CN11
CN10
CN4
MD assembly
CN20
CN21
CN19
DR-428BG board
CN3
6-67