Rf Switching Position Adjustment - Sony DSR-1800 Service Manual

8-3. RF Switching Position Adjustment

8-3. RF Switching Position Adjustment
Be sure to perform the RF switching position adjustment whenever the tape path
adjustment (refer to Section 8-2) is performed.
Perform this adjustment in the AUTO mode.
Basic knowledge
To perform the RF switching position adjustment using the alignment tape (XH5-
1A2 for NTSC or XH5-1AP2 for PAL), refer the following items.
. For the procedure to enter the maintenance menu, refer to Section 5-2-2.
. For the procedure to exit the maintenance menu, refer to Section 5-2-3.
Tools
Alignment tape, XH5-1A2 :
XH5-1AP2 :
Adjustment procedure
RF switching position adjustment using the
[AUTO adjustment]
1. Enter the maintenance menu.
2. Move the cursor to "TAPE PATH ADJUST" which is
displayed with a white background using the [(] or [)]
key.
MENU
MENU
TC PRESET
For DSR-1800/P
3. Press the [*] key.
"TAPE PATH ADJUST" is selected and its lower
layer submenu appears.
MENU
MENU
TC PRESET
For DSR-1800/P
8-10
8-967-999-22 (for NTSC)
8-967-999-26 (for PAL)
RESET(NO)
SET(YES)
SET (YES)
RESET(NO)
SET(YES)
SET (YES)
DSR-1800/P/1600/P