Sony HDV HVR-1500 Service Manual page 135

Tools
. Torque screwdriver's bit (for M1.4) :
. Torque screwdriver's bit (for M2) :
. Torque screwdriver (for 3 kgf.cm) :
. Washer extracting fixture (A) :
. Washer mounting fixture Ø1.5 :
. Cleaning cloth :
. Cleaning fluid :
Replacement
1. Disconnecting the connector
Disconnect the flexible card wire from the
connector (CN17) on the DR-428BG board
located on the back side of the MD chassis.
2. Moving the S/T reel tables
Turn the reel shift motor gear by a skewer and
bring the S/T reel tables to the standard cassette
position. (Refer to Section 6-18.)
3. Removing the L push plate
Remove the two precision screws to remove the L
push plate.
HVR-1500
J-6325-110-A
J-6325-380-A
J-6325-400-A
J-6082-234-A
J-6082-231-A
3-184-527-01
9-919-573-01
DR-428BG board
T reel motor assembly
flexible card wire
L push plate
CN17
Precision screws
P1.4 x 3.5
6-19